ABRASIVE METERING VALVES
For Pressure Release / Normally Open Control Systems
MPV- Mini (M-Valve)
3/4” NPT/BSP inlet / outlet port “Manual plunger” type abrasive metering valve, common on “Normally open” systems or “Pressure release” type blast systems.
Stock #
EE2124-105 (Valve)
Stock #
EE2124-100-99 (Service Kit)
Stock #
EE2124-005-10 (H.D. 3/4" Tee)
MPV (M-Valve)
Manual plunger” type abrasive metering valve, common on “Normally open” systems or “Pressure release” type blast systems
Stock #
EE2125-107 (Valve)
Stock #
EE21251-0099 (Service Kit)
MPV-ll (M-Valve)
Manual plunger” type abrasive metering valve, complete with clean out/ inspection port and quick change stainless steel nipple system.
Stock #
EE2126-107 (Valve)
Stock #
EE2126-100-99 (Service Kit)
FSV-1 (45º)
Standard flat abrasive valve with plate vs. plate metering is available in a 45º mounting version or a vertical mount type (below).
Stock #
EE02427 (Valve)
Stock #
290100R (Service Kit)
FSV-1 (Vertical Type)
Identical to FSV-1 valve to the left but mounts in a vertical position.
Stock #
EE290100V (Valve)
Stock #
290100R (Service Kit)
FSV-II
The FSV-II incorporates nylon wiper seals fitted to either side of the metering plate. This allows a wide variety of abrasives, including metallic and steel grits to be used.
Stock #
EE290100V (Valve)
Stock #
290100R (Service Kit)
FSV-Jr Mini
A 1/2” N.P.T. metering valve built for small abrasive blasters and light duty applications.
Stock # EE01247
MVC-100
Originally designed for use with “pinch valve” to create a normally closed or pressure hold system.
Stock # EEMVC-101 (Valve)
Stock #
EE1NV-40 (Metering donut)
Manual S-Flow Valve
Used on “normally open” system (pressure release), incorporates pinching of pure gum rubber tube for metering, low maintenance.
Stock #
EE290383 (Valve)
Stock #
EE523592 (Metering tube)
Stock #
EE523592X (X-treme tube)
For Pressure Hold / Normally Closed Control Systems
APV (T-Valve)
Available with tungsten carbide or urethane metering sleeve and in 1-1/4” or 1-1/2” NPT sizes. This “Automatic Plunger” type valve is popular on “Normally closed” valving systems or “Pressure hold” systems
Stock #
EE2149-007 (1-1/4" Carbide)
Stock #
EE2149-008 (1-1/2" Carbide)
Stock # EE2149-107 (1-1/4" Urethane)
Stock # EE2149-108 (1-1/2" Urethane)
Stock #
EE21491-0098 (Service Kit, Urethane)
Stock #
EE21490-0099 (Service Kit,Carbide)
Stock #
EE2152-199 (Repair Kit, Urethane)
Stock # EE2152-99 (Repair Kit, Carbide)
APV-ll (T-Valve)
Available with tungsten carbide sleeve only and in 1-1/4” or 1-1/2” NPT sizes. This state of the art “Automatic plunger” type metering valve incorporates a clean-out port, double seals, and abrasive flow adjustment indicator
Stock #
EE2148-007 (1-1/4" Carbide)
Stock #
EE2148-008 (1-1/2" Carbide)
Stock #
EE2148-000-99 (Service Kit)
Auto S-Flow Valve
Used in “normally closed” (pressure hold) systems, pinch tube style metering valve.
Stock # EE290215 (Valve)
Stock #
EE523593 (Metering tube)
Stock #
EE523592X (X-treme tube)
Stock #
EE290296 (Spring Assembly)
Pinch Valve
The Pinch Valve enables the blast machine to stay under pressure, eliminating waiting time for machine re-pressurization during start/stop operation. This valve is commonly used on multi-outlet machines and allows operators to work independently of each other on blast operations. Ideally suited for use with MPV, MPV-II, or MVC-100 metering valves.
Stock #
EE291034