Environmental Conditions
ENVIRONMENTAL CONDITIONS
Positector® Dew Point Meter
The PosiTector® DPM measures and records climatic parameters including relative humidity, air temperature, surface temperature, dew point temperature and the difference between surface and dew point temperatures.
Gauge comes complete with 2 AA batteries, instructions, leather pouch, attachable clamp for one hand operation, built-in infrared port for printing to a wireless IR printer, Certificate of Calibration traceable to NIST, one year warranty.
The PosiTector® DPM measures and records climatic parameters including relative humidity, air temperature, surface temperature, dew point temperature and the difference between surface and dew point temperatures.
Gauge comes complete with 2 AA batteries, instructions, leather pouch, attachable clamp for one hand operation, built-in infrared port for printing to a wireless IR printer, Certificate of Calibration traceable to NIST, one year warranty.
Stock #
20196-6DPM
Stock #
20196-6DPMPR (Probe only)
Stock #
20196-6DPMSB (Magnetic Surface Probe Cable)
Omega Digital Hygrometer
Measures temperature (-20 to +50°C), humidity, dew point and wet bulb. (Ideal for indoor applications)
Batteries included.
Stock # 20119
Omega Digital HygroDHS85XL Non-Contact Thermometer meter
The most economical and highest performing heat spy in its class. Laser sighted.
- Used for close range: 8:1 (D:S Ratio)
- Lower temperatures: 619°F (326°C)
Stock # 20107
AquaTuff 351 Water Proof Thermocouple Instrument (Type K)
- From -73° to 537°C
- Accuracy ±0.5°F (±0.3°C) over entire measurement range at ambient temperatures from 68°F to 86°F (20°C to 30°C)
- Tenth Degree Resolution
- Two AAA batteries included
- Accepts any Type K Thermocouple Probe (not included)
Stock # 20100A (Digital therm gauge)
Thermocouple Probe
Stock # 20101A (Wahl Digital Therm K-Type)
The Wahl TM410 - Type K Thermocouple
- Accuracy of ±1.0°F (0.5°C) in an operating range of 32°F to 200°F
- Optional probes plug into the top of TM410 for easy single-handed use
- Built in pocket/belt clip on back of unit
- Reduced dirt-harboring crevices for easy cleaning
- °F and °C switchable
Stock # 20100
Wahl Surface Probe
Stock # 20101 - 100°F to 130°F
PTC Surface Thermometer
A dual magnet mount calibrated dial thermometer. Utilizing a draft shielded bi-metal sensor in virtual contact with the surface to be measured, the thermometer reaches stability within three minutes.
Size: 2” Diameter
Accuracy: +/- 2% (Full Scale)
Stock #
20146 (-70 to 70 Degrees Celsius)
Stock # 20148 (-20 to 250 Degrees Celsius)
Stock # 20149 (10 to 400 Degrees Celsius)
Stock # 20153 (-20 to 65 Degrees Celsius)
Stock #
20154 (-20 to 120 Degrees Celsius)
Stock #
20150 (-100 to 160 Degrees Fahrenheit)
Stock #
20151 (0 to 250 Degrees Fahrenheit)
Stock #
20152 (0 to 500 Degrees Fahrenheit)
Stock #
20153F (50 to 750 Degrees Fahrenheit)
Dew Point Calculator
For determining:
- Dry/wet bulb temperature °C
- Relative humidity
- Dew point
Comes with vinyl pouch.
Stock #
201650
Bacharach Sling Psychrometer
Hand-held, self contained Sling Psychrometer with replaceable Red Spirit or Mercury Bulbs in Celsius or Fahrenheit. Features built-in slide rule for determining relative humidity and automatic wick-wetting reservoir.
Comes with vinyl pouch.
Stock # 20126 (Sling Psychrometer, Fahrenheit Scale, Red spirit)
Stock #
20127 (Replacement Bulb, Fahrenheit Scale, Red spirit)
Stock #
20128 (Sling Psychrometer, Fahrenheit Scale, Mercury)
Stock #
20129 (Replacement Bulb, Fahrenheit Scale, Mercury)
Stock # 20130 (Sling Psychrometer, Celsius Scale, Mercury)
Stock #
20130R (Sling Psychrometer, Celsius Scale, Red spirit)
Stock #
20131 (Replacement Bulb, Celsius Scale, Mercury)
Stock # 20131R (Replacement Bulb, Celsius Scale, Red spirit)
Stock #
20132 (Replacement wicks, package of 4)
PosiTector® CMM IS Concrete Moisture Meter - In Situ
In Situ probes for measuring relative humidity and temperature in concrete floor slabs. Collect measurements and generate reports in conformance with ASTM F2170, Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using In Situ Probes. The PosiTector CMM IS probes are designed to wirelessly connect with the PosiTector App (iOS/Android) and PosiTector DPM Advanced models via Bluetooth.
Model #
CMMISKITB (Basic Kit)
Model #
CMMISKITC (Complete Kit)
Model #
CMMISKITP3-E (Pro Kit)