DRY-PRO ™ by MOD-U-BLAST® Single Tower, Deliquescent, Air Dryers are a skid mounted system  which includes an aftercooler, a coalescing filter and a single tower dryer filled with desiccant tablets. Warm air enters the aftercooler where it is cooled close to the surrounding temperature, water is then condensed out during this cooling process. The saturated air and the liquid water pass through a coalescing filter where any oil contaminants from the compressor are removed and then proceeds to the inlet of the dryer tank. The water and any solid particles present are separated by gravity and fall to the bottom of the dryer tank. The air moves up through the desiccant tablets which absorb the moisture from the air before it flows through the dryer outlet. The tablets dissolve gradually as they absorb the moisture. The dissolved desiccant and water, falls into the bottom of the vessel. The dryer must be drained periodically to remove the accumulated solution. A manual ball valve is installed for this purpose.

Features

•  Polyarmor G17 deli vessel
  
•  FRL Package
• Sight glass
• Aftercooler
• Temperature guage
•  Coalescing Filters
• CRN Registered Vessel, U Stamped, National Board Certified, ABSA Certified (Alberta) - 1000 & 1600 CFM models only, AS1210 Registered (Australia).
• Pressure relief valve
• Full load lifting eyes / fork pockets

Desiccant Tablets

Mod-U-Blast® Dry-O-Lite deliquescent desiccant is an environment friendly, chemical drying agent specifically formulated for single tower compressed air dryers and natural gas pipeline dryers. It absorbs water vapor from compressed air or gas. The tablet continuously dissolves or deliquesces until consumed.

Stock# 79000 (Desiccant tablets, 50 lb. bag)