Air Hose / Fittings / Clamps

General Purpose Air Hose

Horizon® G.P. Red air hose is an economical air hose for a wide range of industrial, construction, compressor lines, pneumatic tool, etc. (-40ºC to 88ºC)

 

sandblasting air hose

Heavy Duty Contractor Air Drill Hose

Mod-U-Blast® 2” contractor yellow air hose is a 4-ply rugged construction and mining industry air hose rated to 300 PSI, available in 50’ or 100’ lengths. (-35ºC to 88ºC)

 

Stock # 200-MUBAIR  (2" I.D., 2-1/2" O.D., 300 PSI M.W.P.

Air drill hose

Small Brass Air Fittings – Series 41

Sizes available from 1/8” to 1/2”, NPT. Contact sales department for stock numbers.

 

• Hose barbs

• Tees

• Hex nipples

• Couplings

• Bushings

 

• Swivel Fittings

• Reducing nipples

• Hose splicers

• Elbows

• Drains and

   breather vents

 

brass air fittings

Industrial Quick Connects

Industrial interchange couplers in 1/4”, 3/8”, and 1/2”. MANUS stocks  3 common series of “Pull-Back” style air couplers.

 

Series 20 (1/4” to 3/8”)

 

Series 23 (1/4” to 3/8”)

 

Series 22 (1/2”)

 

industrial quick connect
interchange couplers
pull back air couplers

Small Hose Clamps

For hose sizes 1/8” to 1/2”, plated steel construction.

 

• Series – 48

• Screw/worm clamps

• Squeeze/ear clamps

 

 

small hose clamps

Air Hose Couplings – 2 Lug

Universally recognized standard 2 lug air hose couplings, all 2 lug air hose couplings are equipped with gasket. Constructed of plated,

ductile iron.

 

2 lug couplings

Air Hose Couplings – 4 Lug

Industry standard 4 lug air hose couplings, supplied with gasket constructed of plated, ductile iron. WARNING: Always use safety clips

and hose check safety cables on all air hose joint assemblies.

 

 

4-lug couplings

Combination Nipples

Plated steel hose end to male NPT nipples.

Stock # CN50P  (1/2")

Stock # CN75P  (3/4")

Stock # CN100P  (1")

Stock # CN125P  (1-1/4")

Stock # CN150P  (1-1/2")

Stock # CN200P  (2")

Stock # CN300P  (3")

Hose Stem Nipples

Plated steel male NPT hose barbs that accept 2 bolt and 4 bolt hose clamps.

Stock # CN75PX  (3/4")

Stock # CN100PX  (1")

Stock # CN125PX  (1-1/4")

Stock # CN150PX  (1-1/2")

Stock # CN200PX (2")

Stock # CN300PX  (3")

Hose stem nipple

Ground Joint/Hammer Lock Fittings

Hammer lock fittings

Contact Order Desk for ordering information

Center Punch Clamps (Banding)

Special tool required for installation, or MANUS can build assemblies for you. Plated steel construction.  *Double clamping highly recommended.

Stock # CP-5  (For 3/4" Air Hose, 1-1/4" clamp I.D.)

Stock # CP-6  (For 1" Air Hose, 1-1/2" clamp I.D.)

Stock # CP-8  (For 1-1/4" Air Hose, 2" clamp I.D.)

Stock # CP-9  (For1-1/2" Air Hose, 2-1/2" clamp I.D.)

 

Center punch clamps

2 Bolt & 4 Bolt Interlocking Clamps

Designed to lock into collars provided on 2 lug & 4 lug air couplings, hose stems, and ground joint (hammer lock) couplings. Plated ductile iron construction.

*T-Bolt clamps.

 

Stock # CN50PX-C  (2-bolt clamp for 1/2" Air Hose)

Stock # CN75PX-C  (2-bolt clamp for 3/4" Air Hose)

Stock # CN100PX-C  (4-bolt clamp for 1" Air Hose)

Stock # CN125PX-C  (4-bolt clamp for 1-1/4" Air Hose)

Stock # CN150PX-C  (4-bolt clamp for 1-1/2" Air Hose)

Stock # CN200PX-C  (4-bolt clamp for 2" Air Hose)

Stock # CN300PX-C  (4-bolt clamp for  3" Air Hose)

Interlocking clamps

Black Steel Pipe Fittings

Standard wall and schedule 80 thicker walled pipe fittings.

Available in sizes from 1/8” to 4”.

• Bushings (sockets)

• Reducing bushings

• Elbows street elbows

• Plugs

• Tees

• Unions

• Crosses

• Y branches

• Nipples

• Close nipples

 

Galvanized pipe fittings available upon request.

 

Black steel pipe fittings

Rubber & Polyurethane  Lined Pipe Fittings

 

Lined for superior wear life versus standard malleable or galvanized pipe fittings.

Stock # 290182RL (Nipple, 4” long, rubber lined, 1-1/4" NPT)

Stock # 290181RL (Hex nipple, rubber lined, 1-1/4" NPT)

Stock # 25110 (Hex nipple, polyurethane lined, 1-1/4" NPT)

Stock # 25110-A (Hex nipple, unlined, 1-1/4" NPT)

Stock # 290174-RL (Tee, rubber lined, 1-1/4" NPT)

Stock # 290180-RL (Y fitting, rubber lined)

 

Rubber & polyurethane lined fittings

Brass Ball Valves

Multi-purpose airline ball valves with female threaded parts, all brass construction.

Stock #  65-725 (1/4")

Stock #  65-738 (3/8")

Stock #  65-750 (1/2")

Stock #  65-775 (3/4")

Stock #  65-800 (1")

Stock #  65-825 (1-1/4")

Stock #  65-850 (1-1/2")

Stock #  65-900 (2")

Stock #  65-990 (3")

 

Brass ball valves

Brass Swing Check Valves, 200 PSI, 125 PSI Steam

All brass flapper type swing check valves

 

Stock #  F291-J (3/4")

Stock #  F292-J (1")

Stock #  F293-J (1-1/4")

Stock #  F294-J (1-1/2")

Stock #  F295-J (2")

Stock #  F298-J (3")

 

swing check valves

Brass Gate Valves, 200 PSI, 125 PSI Steam

 

Brass construction with steel handle

Stock #  23401(1/4")

Stock #  23403 (3/8")

Stock #  23405 (1/2")

Stock #  23407 (3/4")

Stock #  23409 (1")

Stock #  23410 (1-1/4")

Stock #  23411 (1-1/2")

 

Gate valves

Air Blow-Off Lances

High volume industrial blow-off lances with brass air valves, welded construction. Available in lengths of 36”, 48” or 60”.

 

Stock #  12349 (Lance, squeeze lever, 3/4")

Stock #  12350 (Lance, pull trigger lever, 3/4')

Stock #  12351 (Lance, pull trigger lever, 1/2')

Stock #  12356 (Lance, pull trigger lever, 1')

 

 

Air blow off lance

©2019 Manus Abrasive Systems, Inc. All Rights Reserved

  • EDMONTON
  • VANCOUVER
  • CALGARY
  • WINNIPEG
  • TORONTO

TOLL FREE: 1.800.661.3842

REQUEST A QUOTE