1-1/4" NPSM thread, aluminum jacketed I.D. nozzle consisting of five parts: tungsten carbide lined body, carbide tip, tip holding bolt, lance extension and carbide reducer.
This unit consists of multiple carbide and steel components. Designed to connect to a 3/8” NPT pipe lance (customer furnished) with the tool at one end and the tungsten carbide reducer (supplied with # EE01098 model) at the other, the reducer threads into standard 1-1/4” NPSM nozzle holder. Aluminum oxide, silicon carbide or heavy steel shot not recommended.
Maximum abrasive mesh size = 30.
Air requirement = 80CFM @ 100PSI
Tool consists of 4 components: main body, quad bore tungsten insert, carbide deflection tip and tip holding bolt. Mounts externally to 1-1/8” O.D. (1/2” I.D.), abrasive blast hose. Aluminum oxide not recommended.
Air requirement = 385CFM @ 100 PSI
1-1/4” NPSM thread, steel jacketed I.D. nozzle consisting only three parts: tungsten carbide lined body, large carbide tip and tip holding bolt. Aluminum oxide not recommended.
Air requirements = 225CFM @ 100PSI
This unit consists of multiple tungsten carbide, steel & rubber components and offers two optional centering devices based on job requirements. Aluminum oxide and silicon carbide are not recommended to use with this piece of equipment. #20 Mesh abrasive is the maximum abrasive size to be used with
Air requirement = 225CFM @ 100 PSI
REQUEST A QUOTE